MIG/MAG Welding
Reliable metal joints ensure structural stability
MIG/MAG welding is used to create strong and stable joints in industrial metal structures.
The quality of the weld directly affects reliability, durability, and safe operation.
START-UP Conveyor Service performs MIG/MAG welding with full control of process parameters, weld geometry, and compliance with technical requirements.
Welding Capabilities
Materials and Thickness
Welding
Types
Drawing
Format
Application
Areas
MIG/MAG Welding Technology and Execution Approach
MIG/MAG welding is performed in a shielding gas environment, which prevents contact between molten metal and air, ensuring consistent weld quality.
This results in uniform, defect-free joints and reliable performance of metal structures during operation.
Process Features
Stable weld quality due to shielding gas protection
Capability to work with different types of steel
High welding speed
Continuous process without electrode replacement
Real-time control of weld formation
Execution Approach
Welding performed in accordance with drawings
Control of process parameters
Inspection of joint quality
Adaptation of технологии to operating conditions
Welding Machine: Frontius TransSteel 3000c PULSE
Laser power: 1,500 W
Welding speed: up to 120 mm/s
Power supply voltage: 380–400 V
Welding current: min. 10 A – max. 300 A
Welding current / duty cycle (10 min / 40°C): 300 А / 40%
Welding current / duty cycle (10 min / 40°C): 280 А / 60%
Welding current / duty cycle (10 min / 40°C): 240 А / 100%
Minimum operating voltage range: 14.5 V
Open-circuit voltage: 59 V
Protection class: IP23
FAQ — Questions Clients Frequently Ask
We weld stainless and carbon steel in the range of 1 to 6 mm. Other parameters can be agreed individually.
Yes, MIG/MAG is suitable for stainless steel and provides stable weld quality when using shielding gas.
Shielding gas prevents oxidation, allowing for a uniform, high-strength weld without defects.
Yes, we work with .pdf, .jpg, .png drawings or customer-prepared sketches.
Lead time depends on complexity and scope. In most cases, work is completed within short сроки after approval of the technical specification.
The cost depends on the type of metal, thickness, product complexity, and scope of work. After receiving the drawing or technical specification, we provide a precise quotation.
Yes, we handle both one-off projects and serial production.
Yes, process parameters are monitored and weld quality is inspected during execution.
Contact Our Specialist
Aspiration & Explosion Safety
Artem Morozov
Since 2017, I have been working with solutions for agro-industrial, feed-mill, and milling facilities — from dust-generation audits to the implementation of aspiration and explosion-protection systems. At START-UP, I am responsible for equipment selection, system design, STIF technologies, and full project support.
My approach is based on ATEX, CE, and ISO compliance, engineering precision, and predictable system performance.