INERIS certificate 14ATEX0049X in edition "02" for VIGILEX VQ HW and VQ LW (flame extinguisher EN 16009).

●       Release of the VIGIL'Ex VQ LW series (Pred 0.5 bar)

●       VIGILEX VQ HW-SANI (Pred 1.85 bar or 3.2 bar) and VQ LW-SANI (Pred 0.5 bar) lines are presented for use with sanitary standards.

●      Implementation of category II 3 D opening detector

●       Introduction of two intermediate sizes for VQ HW and LW (457x890 and 645x1130)

●       Change in the maximum protective temperature of the technological process ≤140 ° C (it is limited by the maximum temperature of the used opening detector).

INERIS 19ATEX0016X certificate in revision "02" for the VIGIFLAP line (valves EN 16447 and EN 15089).

●       Application of the EN 15089: 2009 standard

●       An increase in the speed of the air flow from the side of the polluted air to 45 m/s.

●      Removal of the lower limit of air flow speed (15 m / s).

●       Addition of a quality control procedure in accordance with clause 7.4 of the EN 14460 standard.

INERIS 15ATEX0001X certificate for the VIGILEX VL SANITARY model, designed specifically for hygienic applications in the food or pharmaceutical industry. EHEDG certificate - C1900020. Designed to protect systems with low vacuum or operating pressure (up to 50% of static burst pressure), such as spray dryers. The high-tech design of this panel avoids contamination.